Weight Clip Run Ring System – Leader

Step 1

Splice your chosen Evolve size 8 swivel onto your leader.

Step 2

Pass your bead onto your leader, ensuring the larger internal bore is facing away from the swivel.

Step 3

Pass your clip onto your leader as shown.

Step 4

Moisten the bead and insert it into your clip, ensuring the bead is inserted with the radiused front edge down (smooth assembly on top).

Step 5

Insert your swivel into the clips “+” or “-“ setting (shown in the “+” fitting).

Step 6

Pull the swivel all the way into clip, locating it into your chosen “+” or “-“ setting.

Step 7

Using one of the silicone sleeves provided, cut to length (make sure the silicone sleeve is a suitable length so the weight link can freely rotate on the clip later), and push over the weight link.

Step 8

Attach your chosen weight to the weight link and slide the silicone sleeve down over the link/swivel.

Attach your chosen rig and you are ready to fish!

Step 9

Tip: If using mesh PVA bags, pass a Fine Bait Needle through the small hole on the side of the clip, then thread PVA string through and tie around the underside of the clip. This will temporarily lock the swivel into the clip for the cast.